Changes in ARTIST STUDIO release 26.0.1

Last release: 25.3.0

Rolling motion is not reset when patch shape changes (tape or type). [CEV-5051]
When applying the parallel offset on closed curves, the orientation of the master curve and the slave curves might be in opposite directions. To overcome this issue, simply select the master curve and reverse it. [CEV-3291]

Saving stuck at 10% when making the backup file read-only. [CEV-4699]
Avoid AS crash caused by keys.xml being modified after startup. [CEV-5216]
Overlap optimization shows blocking confirmation dialog for each patch layer during multi-layer optimization. [CEV-5277]
Some curves are deleted immediately after creation due to curve modification settings. [CEV-5259]

Separate systems for slave and master curves [CEV-4820]
Slave and master curves can now be assigned to separate coordinate systems, providing more flexibility in curve management.
Updated JS API for curve creation algorithms. [CEV-5279]
New JS layer duplication functions [CEV-3781]
Added two new JS functions:
- duplicate_full_layer() — copies an entire layer including all its contents.
- duplicate_layer_settings() — copies layer settings only, without patch data.

Surface boundary to target projection in Global Overlap Analysis assumes the boundary is always a straight line. [CEV-5207]
Applying new curve modification with existing patches does not remove sublayers. [CEV-5281]
Import of a CAD model consisting of a single point gets stuck. [CEV-5200]
CAD part import or creation causes extremely long remeshing of extracted surfaces. [CEV-5265]
Crash when creating patches with multiple lengths per chain enabled. [CEV-5272]

Improved machine config and gripper file handling [CEV-5210]
Improvements cover file naming patterns, JSON schemas, and schema validation to make configuration management more robust and consistent.

Deposit optimization gives different results if we check collisions first. [CEV-5153]
Crash when running COBYLA optimization for a single patch with undefined collision state. [CEV-5311]
Ensure that all data set patches are shown yellow after sorting. [CEV-5261]

Move Read-only files Extra test to Squish. [CEV-5178]
Don’t generate movements differently when a reference frame is selected — Part 2. [CEV-5088]
Move Machine configs test to Squish. [CEV-5177]
Move Compatibility Extra test to Squish. [CEV-5179]
Move Gripper depth calculation and gripper orientation prediction Extra Test to Squish. [CEV-5190]
Move Data snapshots Extra test to Squish. [CEV-5191]
Move Mount point calibration Extra test to Squish. [CEV-5192]
Move Thickness Offset Test to Squish. [CEV-5168]
Move variable patch length — discrete lengths test to Squish. [CEV-5170]
Move Trapezoid patches test to Squish. [CEV-5171]
Move Modifying patch edges test to Squish. [CEV-5173]
Move data consistency test to Squish. [CEV-5174]
Move Samba PV Lab test to Squish. [CEV-5176]
Improve the robustness of interaction with submenus in Squish test scripts. [CEV-5280]